Solar Water Heater Temperature Release Valve 5Bars AKE

5Bars AKE Temperature Release Valve Specifications

General Specifications

• Brand: AKE

• Valve Size: Up to 3.0 inches

• Capacity: 0-10 liters

• Media: Air, Water, Gas, Fuel

• Body Material: Bronze

• Tank Material: Brass

• Internal Parts: Brass and Stainless Steel

• Seat Disc: Silicone

• Pressure Spring: Stainless Steel

• Max Rated Pressure: 0-5 Bar, 5-10 Bar, 10-15 Bar, 3 Bar

• Set Pressures: 75, 87, 100, 125, 150 psi (0.5, 0.6, 0.7, 0.8, 1.0 MPa)

• Pressure Tolerance: +5%, -10%

• Temperature Relief: 210°F (99°C) standard

• Temperature Range: 65°C to 99°C

• Temperature Tolerance: ±5°C

• Service: Hot Water

• Standard Compliance: ANSI Z21.22

• Minimum Order Quantity: 1 Piece

Applications

• Pressurized solar water heaters

• Gas heaters

• Electric water heaters

• Fuel-based water heaters

• Heat pump water heaters

• Hot water storage tanks

• Boilers and sensitive function heaters

Installation Guidelines

• Positioning: Install on the top or side of the water heater, ensuring the temperature-sensing element is immersed within the top 6 inches of the tank.

• Pipeline Setup: Attach an elimination pipeline under the relief valve, with the terminal station at least 6 inches above the floor drain for easy removal and water observation.

• Orientation: Can be directly installed on the top or side of the water heater.

Maintenance Instructions

• Annual Check: Lift the relief valve handle at least once a year to ensure the waterway remains unblocked.

• Safety Precautions: Verify that the elimination pipeline directs hot water to a safe location to prevent bodily injury.

• Valve Inspection: If no water flows when the handle is lifted, the valve may be faulty. Immediately turn off the water heater and inspect or replace the valve.